Home › Heavy Equipment › Drill rigs
SANY Drill Rigs for Sale in Tulsa
SANY of Tulsa sells new SANY rotary drill rigs to crews across Tulsa. Our Drill Rig lineup includes the SR125MV and the SR285MV, drilling from 4′ 11″ to 7′ 2″ in diameter and down to 308 feet with a friction kelly bar. Best for drilled shafts and bored piles on bridges, commercial buildings, transmission line foundations, and retaining walls. Connect with our expert team to learn more about our lineup and what drill rig is best for your job.
Every SANY drill rig is covered by a 1-year/2,000-hour warranty.
SANY drill rigs are available for short-term and long-term rental, with rent-to-own programs available. Delivery and setup are available across Tulsa.
Loan, lease, and rental purchase options are available for a range of credit profiles. Contact us to review terms for the drill rig you need.
Our technicians handle diagnostic, service, and field service on all SANY drill rigs and other popular brands. SANY parts available on site and non-SANY parts available to order.
SANY Drill Rig Models
Max diameter: 4′ 11″
Max depth: 134′ 6″ / 101′ 8″
Torque: 95,883 lbf-ft
1yr/2,000hr warranty
Max diameter: 7′ 2″
Max depth: 308′ / 200′
Torque: 210,205 lbf-ft
1yr/2,000hr warranty
What Sets SANY Drill Rigs Apart
The SR125MV and SR285MV are rotary drill rigs that run both friction and inter-locking kelly bars, reaching 134′ 6″ and 308′ on a friction kelly bar. Both rigs also switch to low headroom and CFA modes, so one machine can drill under bridges and power lines and also produce continuous flight auger piles.
The SR125MV moves on a single truck and is ready to work when it arrives, and the SR285MV ships on three trucks and typically assembles in under a day. Blind side and backup cameras, cab protection screens, and swing alert lights come on both rigs, and parts and service are handled at our Catoosa dealership.
1 Year / 2,000 Hours Warranty on Every SANY Drill Rig
Loan, lease, and rental purchase options are available on both SANY drill rigs for all credit profiles. Our team will set up a plan that fits your project and your budget.
Explore More SANY Heavy Equipment for Sale or Rent
26-37 tons
Best for light commercial foundations, deep reach utility and road work.
5yr/5,000hr warranty
39-86 tons
Best for mass excavation on commercial sites, heavy demolition, heavy loading.
5yr/5,000hr warranty
8,000 to 12,000 lb lift capacity
Lift capacity for everything from residential and small commercial work to industrial lifting.
3yr/3,000hr warranty
3-4 yd bucket capacity
Small and large capacity wheel loaders for high-volume stockpile loading and heavy push ability.
5yr/5,000hr warranty
Which Drill Rig Should You Choose for Your Project
Drill Rigs for Bridge Foundations
Bridge and overpass foundations sit on drilled shafts that go deep into rock and have to be bored to a set diameter and depth. The SR285MV drills up to 7′ 2″ across and 308′ deep, and its multi-speed rotary adjusts to ground conditions for rock drilling.
Drill Rigs for Commercial Building Piles
Warehouses, commercial buildings, and parking structures often sit on bored piles drilled under each column. The SR125MV drills piles up to 4′ 11″ across and 134′ 6″ deep, and the SR285MV takes over when the structure calls for larger shafts.
Drill Rigs for Transmission Line Foundations
Transmission towers and substations need deep pier foundations drilled at sites spread along a line or across a yard. Because the SR125MV travels on a single truck, moving between tower sites takes less time and fewer loads.
Drill Rigs for Low Headroom Work
Drilling under a bridge, a power line, or inside an existing structure means working with a short mast. Both rigs switch to a low headroom mode, which brings the SR125MV down to as little as 29′ 2″ overall and the SR285MV to 43′ 7″.
Drill Rigs for CFA Piles
Continuous flight auger piles are drilled and filled in one pass, with concrete or grout pumped through the auger as it comes out of the hole. Both rigs run in CFA mode, with up to 2′ 11″ diameter and 70′ 7″ depth on the SR125MV and 3′ 11″ and 88′ 7″ on the SR285MV.
Drill Rigs for Retaining Walls and Shoring
Secant and tangent pile walls hold back soil for deep excavations, road cuts, and below-grade structures, and every pile has to line up with the next one. Auto return to center on the SR125MV puts the rig back over the hole quickly, which keeps a long run of wall piles moving.
Key Benefits of SANY Drill Rigs
- Drilling Diameter: Drill up to 4′ 11″ across on the SR125MV and 7′ 2″ across on the SR285MV.
- Drilling Depth: Friction kelly bars reach 134′ 6″ on the SR125MV and 308′ on the SR285MV.
- Torque and Power: 95,883 and 210,205 lbf-ft of rated torque from 200 and 450 hp Cummins engines.
- Drilling Modes: Standard, low headroom, and CFA modes on both rigs.
- Warranty and Service: Every SANY drill rig carries a 1-year/2,000-hour warranty, with parts and service handled in Catoosa.
Frequently Asked Questions
Should I get the SR125MV or the SR285MV?
Base the choice on shaft size and how often the rig moves. The SR125MV drills up to 4′ 11″ across and 134′ 6″ deep and moves on a single truck, which suits building piles, utility foundations, and jobs that change sites often. The SR285MV drills up to 7′ 2″ across and 308′ deep with 210,205 lbf-ft of torque for bridge shafts, rock, and large-diameter work.
Can I rent a SANY drill rig before buying?
Yes. SANY drill rigs are available for short-term and long-term rental, and rent-to-own programs let rental time count toward the purchase. View drill rig rentals for current availability.
What financing is available on drill rigs?
Loan, lease, and rental purchase options are available on both SANY drill rigs for a range of credit profiles. Apply for financing or contact us to go over terms for the model you need.